Imis Dakom ( Balqis cell ): Mobile Repair

Kamis, 22 September 2011

Mobile Repair

How To Disassembly Apple Iphone 3Gs
Apple Iphone 4 Display Lighting solution
How To Hard Reset HTC HD mini Photon

How To Disassembly Apple Iphone 3Gs

Posted: 21 Sep 2011 11:21 PM PDT

First push something like a paper clip into the hole at the top of the phone. This will release the sim holder.

With the sim holder removed, your phone will look like below.

At the other end of the phone you'll see two screws. Remove these screws.

Release all ribbons.

Remove the screws on each side of the screen.

Now remove the screw circled in the picture below.

Slide something like a credit card under the LCD screen to release it.

You should now have the LCD screen removed. Reverse the whole procedure for reassembly.

Apple Iphone 4 Display Lighting solution

Posted: 21 Sep 2011 11:04 PM PDT

Apple Iphone 4 Display Lighting solution,Apple Iphone 4 Display Lighting Problem,Apple Iphone 4 Display Lighting Ways
This post holds Apple Iphone 4 Display Lighting Problem. If you are having one of these problems check these images out and do these simple solutions

Here Are The Solutions. Please Observe Carefully.

Iphone 4 Display lighting Solution
Iphone 4 Display lighting Problem
Iphone 4 Display lighting Ways
Iphone 4 Display lighting Ic Ways
Iphone 4 Display lighting Service
Iphone 4 Display lighting Mobile
Iphone 4 Display lighting Repair

Apple Iphone 4 Display Lighting solution

How To Hard Reset HTC HD mini Photon

Posted: 21 Sep 2011 10:44 PM PDT

To perform a clear storage

On the Home screen, slide to the Settings tab and then tap Security > Factory reset.
Enter "1234" and then tap Yes.

With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the POWER button shortly and release it. You will then see a message on the screen warning you that the operation will delete all your personal data and reset all settings to manufacturer defaults.
Release the VOLUME UP and VOLUME DOWN buttons.
Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.